Altima 2.5 SL L4-2.5L (QR25DE) (2002)
Refrigerant Pressure Sensor / Switch: Service and Repair
Removal and Installation for Refrigerant Pressure Sensor
1. Discharge the refrigerant. Refer to "HFC-134a (R-134a) Service Procedure". See: Service and Repair
2. Disconnect the refrigerant pressure sensor connector and remove the refrigerant pressure sensor from condenser.
CAUTION:
-
Please be careful not to damage the condenser fins.
-
Apply compressor oil to the O-ring of the refrigerant pressure sensor when installing it.
Tightening torque : 9.8 - 11.7 N.m (1.0 - 1.2 kg-m, 7.3 - 8.6 ft-lb)