Altima 2.5 SL L4-2.5L (QR25DE) (2002)
CLAIMS INFORMATION
SERVICE PROCEDURE
1.
Remove the air filter element.
2.
Remove the air flow meter assembly.
3.
Using a clean shop towel or other method, seal the engine throttle body opening so no dirt or debris can enter the engine intake manifold.
4.
Using low-pressure compressed air or a shop vacuum, clean out all dust/dirt/debris from inside both halves of the air filter housing.
CAUTION:
Make sure all dust/dirt/debris is removed from the air filter housing in order to prevent a repeat incident.
5.
Install the new airflow meter element. Refer to the Parts Information table for the new airflow meter assembly part number.
6.
Install a new Genuine Nissan replacement air filter element into the filter housing cover. then install this assembly in the air filter housing.
IMPORTANT:
^
A new Genuine Nissan air filter element must be used for all warranty claims and any other claim for which Nissan pays.
^
A new Genuine Nissan air filter element is designed to be compatible with the Nissan air flow meter and has proven to provide adequate
dust protection to help prevent these incidents.
^
It is strongly recommended that incident customers continue using Genuine Nissan air filters for assured protection when replacing
according to the routine maintenance schedule.
^
See Parts Information for the appropriate air filter part number (P/N).