Altima 2.5 SL L4-2.5L (QR25DE) (2002)
23.
Securely press the Rubber Pad Insulator into the holes of the Engine Mount (see Figure E18).
Install New Rear-Side Crossmember Heat Shield (Altima ONLY):
24.
Remove the two main Steering Rack and Pinion mounting bolts (see Figure E19).
25.
Install the new Rear-Side Crossmember Heat Shield using the Rack and Pinion bolts (see Figure E19).
2002 Altima: Torque bolts to: 136 - 164 N-m (13.8-16.8Kg-m, 100-121 ft-lb).
2003 Altima: Torque bolts to: 110 - 140 N-m (12 - 14 Kg-m, 82 - 103 ft-lb).
Install New Front-Side Crossmember Heat Shield (Altima ONLY):