Altima 2.5 SL L4-2.5L (QR25DE) (2002)
NOTE:
Make sure all DTCs are cleared
^
If "CMPLT" is displayed on CONSULT-II screen within 2 minutes; go to step 5.
^
If "INCMP" is displayed, or test is not finished within 2 minutes:
a.
Disconnect another injector.
b.
Repeat step B above,
NOTE:
^
For 4 cylinder engines up to 2 injectors can be disconnected one at a time.
^
For 6 and 8 cylinder engines up to 3 injectors can be disconnected one at a time. It is best that 3 disconnected injectors (particularly on V6
engines) not all be on the same engine bank.
5.
Final IAVL procedure.
A.
Make sure all injectors are connected.
B.
Use CONSULT-II to erase any DTC that may be stored and clear Self Learn.
C.
Turn OFF the engine, then re-start it.
D.
After the engine idle has stabilized, perform IAVL again (step 2).
Disclaimer