Altima 2.5 SL L4-2.5L (QR25DE) (2002)
CLAIMS INFORMATION
PARTS INFORMATION
SERVICE PROCEDURE
Replace Starter, Add Cleaner
1.
Replace the starter motor.
^
Use the part number from the Parts Information section of this bulletin.
^
Refer to section SC, "STARTING SYSTEM, Removal and Installation" in the applicable Nissan Electronic Service Manual (ESM).
2.
Add one full can of Nissan In-Tank Fuel System Cleaner to the fuel.
NOTE:
If the fuel tank is less than 3/4 full, instruct the customer to fill the tank as soon as it is convenient after the repair. Driving with the Cleaner
installed and low fuel level will not harm the fuel system or engine, but will reduce the effectiveness of the cleaning process.
3.
Continue to ECM Part Number Check.
ECM Part Number Check
1.
With CONSULT-II "ON", print the Self-DIAG Results as shown.
2.
Attach this printout to the Repair Order.
^
The Self-DIAG Results that you've printed contains the ECM Part Number (P/N).