Altima 2.5 SL L4-2.5L (QR25DE) (2002)
A.
Pull the A/T shift cable end socket clip OFF of the mating ball stud (see Figure 8a). Be careful not to damage the clip.
B.
Pull the A/T shift cable out of the A/T shift assembly (see Figure 8b).
10.
Disconnect the 2 clips that secure the wire harness to the driver side of the A/T shift assembly (see Figure 9).
11.
Remove the A/T shift assembly from the vehicle and gently place it upside down on a clean flat padded surface.
12.
Install the Noise Damper Kit (P/N 34998-3Z000) as follows: