Altima 2.5 SL L4-2.5L (QR25DE) (2002)
![background image](/nissan/altima_2.5_sl/l4-2.5l_(qr25de)/Page-2059003.png)
^
Insert pin 2 into pin groove 1 of front housing and front side plate. Then install cam ring 3 as shown.
Cam ring: D1 is less than D2
Inspection After Disassembly
^
If pulley is cracked or deformed, replace it.
^
If an oil leak is found around pulley shaft oil seal, replace the seal.
^
If the pulley or pulley shaft is deformed or worn, replace it.