Altima 2.5 SL L4-2.5L (QR25DE) (2002)
1.
Remove the two rear "member pin stay (support bracket) bolts on the passenger-side front transverse link (see Figure 2).
2.
Remove the single front "member pin stay (support bracket) bolt (see Figure 2).
3.
Move the support bracket down for clearance.
4.
Remove the front transverse link bolt (see Figure 3).
5.
Push the transverse link toward the front of the vehicle. This will cause a slight gap behind the link bushing and the opening in the suspension
member (frame).