Altima 2.5 SL L4-2.5L (QR25DE) (2002)
![background image](/nissan/altima_2.5_sl/l4-2.5l_(qr25de)/Page-1800003.png)
^
Insert screwdriver into transaxle opening for right drive shaft and strike with a hammer.
^
Be careful not to damage pinion mate shaft and side gear.
INSPECTION AFTER REMOVAL
^
Check for halting movement or a noticeable rattle by moving a joint part vertically, horizontally and to axial direction.
^
Check for crack damage and grease leak of boot.
INSTALLATION
Transaxle Side
1. Drive a new oil seal into transaxle case.
2. Set Tool along the inner circumference of oil seal.