Altima 2.5 SL L4-2.5L (QR25DE) (2002)
PARTS INFORMATION
NOTE:
The Threadlocker is considered a "shop supply. There is enough in the bottle for 50 to 100 applications. Do NOT put it on the warranty claim.
CLAIMS INFORMATION
NOTE:
The Threadlocker is considered a "shop supply." There is enough in the bottle for 50 to 100 applications. Do NOT put it on the warranty claim.
Submit a Primary Failed Part (PP) line claim using the claims coding table.
SERVICE PROCEDURE
Replace the M/T Console Boot as follows:
1.
Unscrew and remove the M/T Shift Knob.
NOTE:
The Shift Knob may become damaged (break) when you try to remove it. Install a new Shift Knob if this happens.
2.
Remove the old M/T Console Boot assembly. Refer to the applicable Service Manual for removal.
3.
Install the new M/T Console Boot assembly in the reverse order it was removed.
NOTE:
Before you install the new M/T Console Boot assembly:
^
Clean the Flange Bracket (on the shifter) to remove dirt/debris/residue.