Altima 2.5 SL L4-2.5L (QR25DE) (2002)
Rear Door Window Regulator: Service and Repair
REMOVAL
1. Remove the rear door finisher. Refer to "Rear Door".
2. Remove the inside seal.
3. Operate the power window switch to raise/lower the door window until the glass mounting bolts can be seen.
4. Remove the glass mounting bolts, and place the glass on the inner bottom of the panel.
5. Remove the mounting bolts, and remove the regulator and guide channel from the panel.
6. Disconnect the connector for the regulator assembly.