Altima GXE L4-2.4L (KA24DE) (1999)
*:If high resistance exists in the switch side circuit (caused by a single stand), terminal 1 does not detect battery voltage. Control Unit does not detect
the switch is ON even if the switch does turn ON. Therefore, the Control unit does not supply power to light up the lamp.
Relationship Between Open/Short (high Resistance) Circuit And The Control Unit Pin Control: Case 2
*:If high resistance exists in the switch side circuit (caused by a single stand), terminal 2 does not detect approx. 0 V. Control unit does not detect the
switch is ON even if the switch does turn on. Therefore, the ECM does not control ground to light up the lamp.
How to Read Harness Layout