Altima GXE L4-2.4L (KA24DE) (1999)
Standard type (not waterproof type) connector should be probed from harness side with "T" pin.
NOTE:
^
If the connector has a rear cover such as a ECM connector, remove the rear cover before probing the terminal.
^
Do not probe waterproof connector from harness side. Damage to the seal between wire and connector may result.
Female Terminal
There is a small notch above each female terminal. Probe each terminal with the "T" pin through the notch.
NOTE:
^
Do not insert any object other than the same type male terminal into female terminal.
^
Some connectors do not have a notch above each terminal.
To probe each terminal, remove the connector retainer to make contact space for probing.
Male Terminal
Carefully probe the contact surface of each terminal using a "T" pin.
Do not bend terminal.
Do not bend terminal
Terminal Lock Inspection