Altima GXE L4-2.4L (KA24DE) (1999)
6. Remove snap ring "B."
7. Draw out boot.
-
Cover drive shaft serrations with tape so as not to damage the boot.
Wheel Side
CAUTION: The joint on the wheel side cannot be disassembled.
1. Before separating joint assembly, put matching marks on drive shaft and joint assembly.
2. Separate joint assembly with a suitable tool.
-
Be careful not to damage threads on drive shaft.
3. Remove boot bands.
4. Remove the sensor rotor using suitable puller and bearing replacer.
Support Bearing
1. Remove dust shield.
2. Remove snap ring.