nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Operative Condition|Page 9284 > < Diagram Information and Instructions|Page 9281
Page 1
background image

Power Locks: Testing and Inspection
Operative Condition

Operative Condition

^  The lock and unlock switch on driver's door trim can lock and unlock all doors.
^  With the lock knob on front LH or RH door set to LOCKED, all doors are locked.
^  With the door key inserted in the key cylinder on front LH or RH door, turning it to LOCK, will lock all doors; turning it to UNLOCK once

unlocks the corresponding door; turning it to UNLOCK again within 5 seconds after the first unlock operation unlocks all of the other doors.

However, if the ignition key is in the ignition key cylinder and one or more of the front doors are open, setting the lock and unlock switch, lock knob, or
the door key to LOCK locks the doors once but then immediately unlocks them. (KEY REMINDER DOOR SYSTEM)
It any of the following symptoms occur, key reminder door system is malfunctioning.

^  With ignition key removed from the ignition key cylinder and all doors closed, operating the lock and unlock switch or lock knob on the front LH

or RH door trim unlocks all doors the instant they are locked.

^  With ignition key inserted into the ignition key cylinder and front LH or RH door opened, operating the lock and unlock switch or lock knob on

the front LH or RH door trim to LOCK does not unlock all doors.

Operative Condition|Page 9284 > < Diagram Information and Instructions|Page 9281