Altima SE L4-2.4L (KA24DE) (1997)
DISASSEMBLY
1. Remove piston by turning it "counterclockwise" with suitable long nose pliers or commercial service tool.
2. Pry off snap ring from piston with suitable pliers and remove adjusting nut.
3. Disassemble cylinder body, as noted in the following steps:
a. Pry off snap ring with suitable pliers, then remove spring cover, spring and seat.
b. Pry off snap ring then remove key plate, push rod and strut.
c. Remove piston seal.
^
Be careful not to damage cylinder body.