nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

ABOUT US
Master Cylinder|Page 7825 > < Actuator <--> [Hydraulic Control Assembly - Antilock Brakes]|Specifications|Page 7820

Altima SE L4-2.4L (KA24DE) (1997)

Page 1
background image

Brake Master Cylinder: Specifications
Master Cylinder

WARNING
This specification information is for cars without antilock brake system.  If you have a car with antilock brakes, see Antilock Brake System,
Master Cylinder. See:  

DIMENSIONS

Bore Diameter ..............................................................................................................................................................................  23.81 mm (0.94 inches)

TIGHTENING SPECIFICATIONS

Mounting Nuts .........................................................................................................................................................................  12 - 15 Nm (9 - 11 ft. lbs.)
Piston (Valve) Stopper  .....................................................................................................................................................  1.5 - 3.0 Nm (13 - 26 inch lbs.)

Master Cylinder|Page 7825 > < Actuator <--> [Hydraulic Control Assembly - Antilock Brakes]|Specifications|Page 7820