Altima SE L4-2.4L (KA24DE) (1997)
Compressor Clutch
^
Remove the snap ring using external snap ring pliers.
Compressor Clutch
^
Pulley removal
Use a commercially available pulley puller. Position the center of the puller on the end of the drive shaft. Remove the pulley assembly with the
puller.
For Pressed Pulleys:
To prevent deformation of the pulley groove, the puller claws should be hooked under (not into) the pulley groove.
^
Remove the field coil harness clip using a screwdriver.
Compressor Clutch
^
Remove the three field coil fixing screws and remove the field coil.
INSTALLATION
Compressor Clutch - Installation
^
Install the field coil.
^
Be sure to align the coil's pin with the hole in the compressor's front head
^
Install the field coil harness clip using a screwdriver.