Altima SE L4-2.4L (KA24DE) (1997)
HOW TO SWITCH DIAGNOSTIC TEST MODES
The following emission-related diagnostic information is cleared from the ECM memory in the mode obtained.
1. Diagnostic trouble codes
2. 1st trip diagnostic trouble codes
3. Freeze frame data
4. 1st trip freeze frame data
5. System readiness test (SRT) codes
6. Test values
-
Switching the modes is not possible when the engine is running.
-
When ignition switch is turned off during diagnosis, power to ECM will drop after approx. 5 seconds. The diagnosis will automatically return
to Diagnostic Test Mode I.
-
Turn back diagnostic test mode selector to the fully counterclockwise position whenever vehicle is in use.