nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

ABOUT US
Overrun Clutch Solenoid Valve <--> [Clutch Control Solenoid Valve, A/T] > < Forward and Over Run Clutches|Page 6745

Altima SE L4-2.4L (KA24DE) (1997)

Page 4
background image

7. Measure clearance between retaining plate and snap ring. If not within allowable limit, select proper retaining plate. 

Specified clearance:

Standard: 0.5 - 0.8 mm (0.020 - 0.031 inch)
Allowable limit: 1.2 mm (0.047 inch) 

Thickness Of Retaining Plates Part No. And Thickness:

31537-80x05: 6.6 mm (0.260 inch)
31537-80x06: 6.8 mm (0.268 inch)
31537-80x07: 7.0 mm (0.276 inch)
31537-80x08: 7.2 mm (0.283 inch)
31537-80x09: 7.4 mm (0.291 inch)
31537-80x20: 7.6 mm (0.299 inch)
31537-80x21: 7.8 mm (0.307 inch) 

8. Check operation of reverse clutch. 

Overrun Clutch Solenoid Valve <--> [Clutch Control Solenoid Valve, A/T] > < Forward and Over Run Clutches|Page 6745