nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Campaign - A/T Solenoid Valve Replacement|Page 7103 > < Campaign - A/T Solenoid Valve Replacement|Page 7101
Page 5
background image

10.

Remove ONLY the thirteen 10 mm bolts (shown in Figure 3) holding the control valve assembly to the transaxle. Remove the control valve
assembly.

NOTE

Be careful not to drop the manual valve shaft the servo release accumulator return spring or the lip seals. Also be careful not to damage the control
valve assembly sealing gasket.

11.

Inspect the control valve strainer for debris. Remove and clean strainer as needed.

Campaign - A/T Solenoid Valve Replacement|Page 7103 > < Campaign - A/T Solenoid Valve Replacement|Page 7101