nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

ABOUT US
Input Shaft, A/T > < Idler Gear, A/T|Service and Repair|Page 6821

Altima SE L4-2.4L (KA24DE) (1997)

Page 5
background image

6. Press needle bearing on bearing retainer.

7. Install snap ring to bearing retainer.

8. After packing ring grooves with petroleum jelly, carefully install new seal rings on output shaft and bearing retainer.

NOTE:  Roll paper around seal rings to prevent seal rings from spreading.

Input Shaft, A/T > < Idler Gear, A/T|Service and Repair|Page 6821