Altima XE L4-2.4L (KA24DE) (1999)
Power Steering Pump: Service and Repair
PRE-DISASSEMBLY INSPECTION
Disassemble the power steering pump only if the following items are found:
-
Fluid leak from any point shown in the figure.
-
Deformed or damaged pulley.
-
Poor performance.
INSPECTION
Pulley And Pulley Shaft
-
If pulley is cracked or deformed, replace it.
-
If an oil leak is found around pulley shaft oil seal, replace the seal.
-
If serration on pulley or pulley shaft is deformed or worn, replace it.
DISASSEMBLY
CAUTION:
-
Parts which can be disassembled are strictly limited. Never disassemble parts other than those specified.
-
Disassemble in as clean a place as possible.
-
Clean your hands before disassembly.
-
Do not use rags; use nylon cloths or paper towels.
-
When disassembling and reassembling, do not let foreign matter enter or contact the parts.
1. Remove snap ring, then draw drive shaft out.
-
Be careful not to drop drive shaft.
2. Remove oil seal.
-
Be careful not to damage front housing.