Altima XE L4-2.4L (KA24DE) (1999)
Suspension Strut / Shock Absorber: Service and Repair
Front
REMOVAL AND INSTALLATION
Remove strut assembly fixing bolts and nuts (from hood ledge).
WARNING: Do not remove piston rod lock nut on vehicle.
DISASSEMBLY
1. Set strut assembly in vise, then loosen piston rod lock nut.
WARNING: Do not remove piston rod lock nut at this time.
2. Compress spring with tool so that the strut mounting insulator can be turned by hand.
WARNING: Make sure that the pawls of the two spring compressors are firmly hooked on the spring. The spring compressors must be
tightened alternately so as not to tilt the spring.
3. Remove piston rod lock nut.
INSPECTION
Strut Assembly
-
Check for smooth operation through a full stroke, both compression and extension.
-
Check for oil leakage occurring on welded or gland packing portion.
-
Check piston rod for cracks, deformation or other damage. Replace if necessary.
Strut Mounting Insulator
-
Check cemented rubber-to-metal portion for separation or cracks.
-
Check rubber parts for deterioration.