Armada 2WD V8-5.6L (VK56DE) (2006)
Left turn signal and hazard lamp output is supplied
-
through trailer turn relay LH terminal 3
-
to trailer connector terminal 1.
Right turn signal and hazard lamp output is supplied
-
through trailer turn relay RH terminal 3
-
to trailer connector terminal 4.
TRAILER STOP LAMP OPERATION
The trailer stop lamps are controlled by the electric brake. The electric brake receives stop lamp switch signal at electric brake (pre-wiring) terminal 2
when the brake pedal is pressed. When the brake pedal is pressed, power is supplied by the electric brake
-
through electric brake (pre-wiring) terminal 3
-
to trailer connector terminal 3.
TRAILER POWER SUPPLY OPERATION
The trailer power supply is controlled by the trailer tow relay 2. When the ignition switch is in the ON or START position, power is supplied
-
through 10 A fuse (No. 51, located in the IPDM E/R)
-
to IPDM E/R terminal 16
-
to trailer tow relay 2 terminal 1.
When energized, the trailer tow relay 2 supplies power
-
through trailer tow relay 2 terminals 5 and 7
-
to trailer connector terminal 5.