Armada 2WD V8-5.6L (VK56DE) (2006)
Parking Brake Shoe: Service and Repair
Removal and Installation
REMOVAL
WARNING: Clean the brakes with a vacuum dust collector to minimize the hazard of airborne particles or other materials.
NOTE: Remove the disc rotor only with the parking brake pedal completely disengaged.
1. Remove wheel hub and bearing assembly.
^
Disconnect the wheel sensor at the harness connector. It is not necessary to remove the wheel sensor from the wheel hub and bearing assembly.
2. Remove the return springs.
3. Remove the adjuster.
4. Remove the retainers, anti-rattle pins and shoes.
5. Disconnect the rear cable from the toggle lever.
6. Remove the back plate.
INSPECTION AFTER REMOVAL
Lining Thickness Inspection