Armada 2WD V8-5.6L (VK56DE) (2006)
Yaw Rate Sensor: Service and Repair
Removal and Installation
G SENSOR
Removal and Installation
REMOVAL
1. Remove center console.
2. Remove yaw rate/side/decel G sensor attaching nuts.
CAUTION:
^
Do not use power tools to remove or install yaw rate/side/decel G sensor.
^
Do not drop or strike the yaw rate/side/decel G sensor.
3. Disconnect harness connector and remove the yaw rate/side/decel G sensor.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
^
Do not drop or strike the yaw rate/side/decel G sensor.
^
After installation, calibrate the yaw rate/side/decel G sensor.