Armada 2WD V8-5.6L (VK56DE) (2006)
b. Select the one most visible notch of the four on the bolt flange. Corresponding to the selected notch, put a alignment mark (such as paint) on
the crankshaft pulley.
Crankshaft pulley bolt torque
Step 1: 93.1 Nm (9.5 kg-m, 69 ft. lbs.)
Step 2: additional 90° (angle tightening)
14. Rotate the crankshaft pulley in normal direction (clockwise when viewed from engine front) to check for parts interference.
15. Installation of the remaining components is in the reverse of order of removal.