Armada 2WD V8-5.6L (VK56DE) (2006)
4. Remove the shock absorber upper and lower end bolts using power tool.
5. Remove the shock absorber.
CAUTION: If equipped with the rear load leveling air suspension system, do not damage the rubber boot on the shock absorber.
INSTALLATION
Installation is in the reverse order of removal.
^
Tighten the shock absorber bolts to specification. Refer to Components.
Inspection
Inspection
^
Check for oil leakage on welded or gland packing portions.
^
If equipped with the rear load leveling air suspension system, check the shock absorber for any air leaks or damage to the rubber boot.
^
Check the shock absorber for smooth operation through a full stroke, both compression and extension.
^
Check piston rod for cracks, deformation or other damage and replace if necessary.