Armada 2WD V8-5.6L (VK56DE) (2006)
Rear Suspension Without Rear Load Leveling Air Suspension System
Rear Load Leveling Air Suspension System
Removal and Installation
REMOVAL
1. Remove the wheel and tire using power tool.
2. Remove the stabilizer bar clamp. Refer to Components.
3. Remove the cotter pin and discard, then remove the lock nut from the drive shaft.
^
Do not reuse the cotter pin, discard after removal and use a new cotter pin for installation.
4. Remove the six bolts from the inside flange of the drive shaft using power tool.