Armada 2WD V8-56L Flex Fuel (2009) Brake Pedal Assy TSB
Brake Pedal Assy: Service and Repair
BRAKE PEDAL
Removal and Installation
REMOVAL
CAUTION:
-
Before removal and installation, the accelerator and brake pedals must be in the forward most position (closest to the floor). This is to
align the base position of the accelerator and brake pedals.
-
Do not disassemble the brake pedal adjusting mechanism.
-
Avoid damage from dropping the brake pedal assembly during handling.
-
Keep the brake pedal assembly away from water.
1. Remove the lower instrument panel LH. Refer to See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Instrument Panel Assembly/Exploded View.
2. Remove the stop lamp switch and ASCD cancel switch from the pedal assembly.