Armada 4WD V8-5.6L (VK56DE) Flex Fuel (2009)
NOTE:
Firing order 1-8-7-3-6-5-4-2
-
No. 1 cylinder compression TDC
-
Measure valve clearance using suitable tool. Refer to See: Specifications/General Specification.
CAUTION:
If the inspection was carried out with a cold engine, make sure the values with a fully warmed up engine are still within specifications.
8. Turn the crankshaft pulley clockwise 270° from the position of No. 1 cylinder compression TDC to obtain No. 3 cylinder compression TDC.
9. Measure valve clearances at the locations marked "*" as shown in the table below (locations indicated with white arrow).
-
White Arrow : Engine front
-
Black Arrow : Measurable at No.1 cylinder compression top dead center
-
White Arrow : Measurable at No. 3 cylinder compression top dead center
-
A: RH
-
B: LH
-
C: Exhaust
-
D: Intake