Cube L4-1.8L (MR18DE) (2010)
Alarm System Transponder: Service and Repair
Removal And Installation
With Intelligent Key System
NATS ANTENNA AMP.
Removal and Installation
REMOVAL
1. Remove the steering column cover. See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument
Panel Assembly.
2. Remove the NATS antenna amp. mounting screw (A), and then remove NATS antenna amp. (1) from steering lock assembly (2).
INSTALLATION
Install in the reverse order of removal.
Without Intelligent Key System
NATS ANTENNA AMP.
Removal and Installation
REMOVAL
1. Remove the switch panel finisher. See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument
Panel Assembly.
2. Disengage pawl with flat blade screwdriver.
Broken Triangle : Pawl
3. Pull NATS antenna amp.(1) forward and then remove push-button ignition switch (2).
INSTALLATION
Install in the reverse order of removal.