Cube L4-1.8L (MR18DE) (2010)
Body Control Module: Service and Repair
With Intelligent Key System
Exploded View
BCM (BODY CONTROL MODULE)
Exploded View
CAUTION:
Before replacing BCM, perform "READ CONFIGURATION" to save or print current vehicle specification. See: Testing and
Inspection/Additional Service When Replacing Control Unit (BCM)/Description/With Intelligent Key System
Removal And Installation
BCM (BODY CONTROL MODULE)
Removal and Installation
CAUTION:
Before replacing BCM, perform "READ CONFIGURATION" to save or print current vehicle specification. See: Testing and
Inspection/Additional Service When Replacing Control Unit (BCM)/Description/With Intelligent Key System
REMOVAL
1. Remove knee protector. See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Exploded View.
2. Remove fuse block (J/B).
3. Remove harness clip.
4. Remove screws.
5. Remove BCM and disconnect the connector.
6. Remove the ignition relay and back door lock actuator relay.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
-
Be sure to perform "WRITE CONFIGURATION" when replacing BCM.
-
Be sure to perform the system initialization (NATS) when replacing BCM. See: Testing and Inspection/Programming and
Relearning/Additional Service When Replacing Control Unit (BCM)/Special Repair Requirement/With Intelligent Key System.