Cube L4-1.8L (MR18DE) (2010)
Trunk / Liftgate Hinge: Service and Repair
Removal and Installation
With Intelligent Key System
BACK DOOR
BACK DOOR HINGE : Removal and Installation
CAUTION:
Perform work with 2 workers, because of its heavy weight.
REMOVAL
1. Remove back door assembly. See: Service and Repair/Removal and Installation/With Intelligent Key System.
2. Remove back door hinge mounting bolts (body side), and then remove back door hinge.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
-
Check back door open/close operation after installation.
-
Check back door hinge rotating part for poor lubrication. If necessary, apply body grease.
-
When removing and installing back door assembly, perform the fitting adjustment. See: Adjustments/With Intelligent Key System.
-
After installation, apply touch-up paint (the body color) onto the head of back door hinge mounting nuts.
Without Intelligent Key System
BACK DOOR
BACK DOOR HINGE : Removal and Installation
CAUTION:
Perform work with 2 workers, because of its heavy weight.
REMOVAL
1. Remove back door assembly. See: Service and Repair/Removal and Installation/Without Intelligent Key System.
2. Remove back door hinge mounting bolts (body side), and then remove back door hinge.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
-
Check back door open/close operation after installation.
-
Check back door hinge rotating part for poor lubrication. If necessary, apply body grease.
-
When removing and installing back door assembly, perform the fitting adjustment. See: Adjustments/Without Intelligent Key System.
-
After installation, apply touch-up paint (the body color) onto the head of back door hinge mounting nuts.