Cube L4-1.8L (MR18DE) (2010)
2. Check continuity between BCM harness connector and rear door lock assembly RH harness connector.
3. Check continuity between BCM harness connector and ground.
Is the inspection result normal?
YES - Replace BCM. See: Body Control Systems/Body Control Module/Service and Repair/With Intelligent Key System/Removal And Installation.
NO - Repair or replace harness.
Without Intelligent Key System
DOOR LOCK ACTUATOR
REAR RH : Description
Locks/unlocks the door with the signal from BCM.
DOOR LOCK ACTUATOR
REAR RH : Diagnosis Procedure
1.CHECK DOOR LOCK ACTUATOR INPUT SIGNAL
1. Turn ignition switch OFF.
2. Disconnect rear door lock assembly RH connector.
3. Check voltage between rear door lock assembly RH harness connector and ground.
Is the inspection result normal?
YES - Replace rear door lock assembly RH. See: Door Locks/Service and Repair/Rear Door Lock/Removal And Installation/Without Intelligent Key
System.
NO - GO TO 2.
2.CHECK DOOR LOCK ACTUATOR CIRCUIT
1. Disconnect BCM connector and all door lock actuator.
2. Check continuity between BCM harness connector and rear door lock assembly RH harness connector.
3. Check continuity between BCM harness connector and ground.