Cube L4-1.8L (MR18DE) (2010)
-
Remove the seatback retainers (1), and then open the fasteners (2).
-
Remove the armrest hinge bracket mounting nuts.
-
Remove the pawl of armrest hinge inner bush, and then slide armrest assembly.
2. Remove the seatback trim and seatback pad.
-
Remove the seatback retainers (1), and then open the fasteners (2).
-
Remove the headrest holder.
CAUTION:
Before installing headrest holder check its orientation.
(front/rear and right/left)
-
Remove the seatback trim and seatback pad from seatback frame.
-
Remove the hog rings to separate the seatback trim and seatback pad.
3. Remove the seatback silencer.
4. Remove the seatback frame.
-
Remove the pawls, and then remove outer hinge finisher.