Cube L4-1.8L (MR18DE) (2010)
Brake Hose/Line: Procedures
Hydraulic Piping
BRAKE PIPING
FRONT : Hydraulic Piping
Inspection
BRAKE PIPING
FRONT : Inspection
INSPECTION AFTER INSTALLATION
1. Check the brake hoses and tubes for the following: no scratches; no twist and deformation; no interference with other components when steering
the steering wheel; no looseness at connections.
2. Depress the brake pedal with a force of 785 N (80 kg, 176 lb) and hold down the pedal for approximately
5 seconds with the engine running. Check for any fluid leakage.
CAUTION:
Retighten the applicable connection to the specified torque and repair any abnormal (damaged, worn or deformed) part if any brake fluid
leakage is present.
Hydraulic Piping
BRAKE PIPING
REAR : Hydraulic Piping