Cube L4-1.8L (MR18DE) (2010)
Harmonic Balancer - Crankshaft Pulley: Specifications
Crankshaft Pulley
Install crankshaft pulley with the following procedure:
Tighten crankshaft pulley bolt.
Torque : 68.6 N.m (7.0 kg-m, 51 ft-lb)
Completely loosen.
Torque : 0 N.m (0 kg-m, 0 ft-lb)
Tighten crankshaft pulley bolt.
Torque : 29.4 N.m (3.0 kg-m, 22 ft-lb)
Put a paint mark (B) on crankshaft pulley (2), matching with any one of six easy to recognize angle marks (A) on crankshaft pulley bolt (1) flange.
Turn another 60 degrees clockwise (angle tightening).
-
Check the tightening angle with movement of one angle mark.
Check that crankshaft rotates clockwise smoothly.