Cube L4-1.8L (MR18DE) (2010)
Arrow Indicates : Engine front
CAUTION:
Cover engine openings to avoid entry of foreign materials.
9. Remove brackets from intake manifold, if necessary.
10. Remove engine cover bracket, if necessary.
11. Remove EVAP canister purge volume control solenoid valve from intake manifold, if necessary.
INSTALLATION
Note the following, and install in the reverse order of removal.
Intake Manifold
1. Check if gasket is not dropped from the installation groove of intake manifold.
2. Install intake manifold with the following procedure:
a. Tighten in numerical order as shown in the figure.
Arrow Indicates : Engine front
b. Tighten No. 1 bolt again.