Cube L4-1.8L (MR18DE) (2010)
factory). See: Camshaft, Lifters and Push Rods/Camshaft/Specifications.
5. Install the selected valve lifter.
6. Install camshaft. See: Camshaft, Lifters and Push Rods/Camshaft/Service and Repair/Exploded View.
7. Install timing chain and related parts. See: Timing Components/Timing Chain/Service and Repair/Removal and Replacement/Exploded View.
8. Manually rotate crankshaft pulley a few rotations.
9. Check that the valve clearances is within the standard. Refer to "INSPECTION".
10. Install remaining parts in the reverse order of removal.
11. Warm up the engine, and check for unusual noise and vibration.