Cube L4-1.8L (MR18DE) (2010)
REMOVAL
1. Remove globe box assembly. See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Exploded View.
2. Remove mounting screws (A), and then remove mode door motor (1).
3. Disconnect mode door motor connector.
INSTALLATION
Installation is basically the reverse order of removal.
Air Mix Door Motor
DOOR MOTOR
AIR MIX DOOR MOTOR : Removal and Installation
REMOVAL
1. Remove foot duct LH. See: Air Duct/Service and Repair/Exploded View.
2. Remove mounting screws (A), and then remove air mix door motor (1).
3. Disconnect air mix door motor connector.
INSTALLATION
Installation is basically the reverse order of removal.