Cube L4-1.8L (MR18DE) (2010)
Blower Motor: Service and Repair
Removal And Installation
BLOWER MOTOR
Removal and Installation
REMOVAL
1. Remove remote keyless entry receiver. See: Accessories and Optional Equipment/Antitheft and Alarm Systems/Keyless Entry/Keyless Entry
Receiver/Service and Repair/Exploded View/With Intelligent Key System (WITH I-KEY) or See: Accessories and Optional Equipment/Antitheft
and Alarm Systems/Keyless Entry/Keyless Entry Receiver/Service and Repair/Exploded View/Without Intelligent Key System (WITHOUT
I-KEY).
2. Disconnect blower motor connector.
3. Press flange holding hook (A), and then turn blower motor (1) clockwise.
4. Pull outside, and then remove blower motor.
INSTALLATION
Installation is basically the reverse order of removal.