Cube L4-1.8L (MR18DE) (2010)
Heater Core: Service and Repair
A/C UNIT ASSEMBLY
HEATER CORE : Removal and Installation
REMOVAL
1. Remove A/C unit assembly. See: Housing Assembly HVAC/Service and Repair/Automatic Air Conditioner (automatic air conditioner), See:
Housing Assembly HVAC/Service and Repair/Manual Air Conditioner (manual air conditioner) or See: Housing Assembly HVAC/Service and
Repair/Manual Heater (manual heater).
2. Remove heater pipe grommet and heater pipe support from A/C unit assembly.
3. Remove foot duct LH. See: Air Duct/Service and Repair/Exploded View.
4. Remove mounting screw, and then slide heater core to leftward.
5. Remove heater core from A/C unit assembly.
INSTALLATION
Installation is basically the reverse order of removal.
NOTE:
See: Engine, Cooling and Exhaust/Cooling System/Coolant/Service and Repair/Refilling when filling radiator with engine coolant.