Cube L4-1.8L (MR18DE) (2010)
Center Mounted Brake Lamp Bulb: Service and Repair
HIGH-MOUNTED STOP LAMP
Replacement
CAUTION:
-
Disconnect the battery negative terminal or the fuse.
-
Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
-
Never touch bulb by hand while it is lit or right after being turned off.
-
Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect the performance of lamp. When
replacing bulb, be sure to replace it with new one.
HIGH-MOUNTED STOP LAMP BULB
1. Remove the back door finisher upper. See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate Interior Trim Panel/Service
and Repair/Exploded View.
2. Rotate the bulb socket(1) counterclockwise, and unlock it.
3. Remove the bulb from the bulb(2) socket.