Cube L4-1.8L (MR18DE) (2010)
Combination Switch: Service and Repair
Removal And Installation
With Intelligent Key System
COMBINATION SWITCH
Removal and Installation
REMOVAL
1. Remove steering column cover. See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Exploded View
.
2. Remove screws.
3. Disconnect the connector.
4. Pull up the combination switch to remove it.
INSTALLATION
Install in the reverse order of removal.
Without Intelligent Key System
COMBINATION SWITCH
Removal and Installation
REMOVAL
1. Remove steering column cover. See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Exploded View
.
2. Remove screws.
3. Disconnect the connector.
4. Pull up the combination switch to remove it.
INSTALLATION
Install in the reverse order of removal.