Cube L4-1.8L (MR18DE) (2010)
- Pinch quick connector square-part (A) with your fingers, and pull out the quick connector (1) by hand.
- If quick connector and tube on sender unit are stuck, push and pull several times until they move, and pull out.
CAUTION:
-
Quick connector can be removed when the tabs are completely depressed. Never twist it more than necessary.
-
Never use any tools to disconnected quick connector.
-
Keep resin tube away from heat. Be especially careful when welding near the resin tube.
-
Prevent acid liquid such as battery electrolyte, etc. from getting on resin tube.
-
Never bend or twist resin tube during installation and disconnection.
-
To keep the connecting portion clean and to avoid damage and foreign materials, cover them completely with plastic bags (A) or
something similar.
-
Never insert plug, preventing damage on O-ring in quick connector.
8. Remove lock ring for fuel level sensor unit, fuel filter and fuel pump assembly with fuel tank lock ring wrench [SST: KV991J0090 (J-46214)] (A)
by turning counterclockwise.
Arrow Indicates : Vehicle front
9. Remove fuel level sensor unit, fuel filter and fuel pump assembly (1).