Cube L4-1.8L (MR18DE) (2010)
Fluid - M/T: Service and Repair
Draining
GEAR OIL
Draining
1. Start engine and let it run to warm up transaxle.
2. Stop engine. Remove drain plug (1) and gasket, using a socket [Commercial service tool] and then drain gear oil.
3. Set a gasket on drain plug and install it to clutch housing, using a socket [Commercial service tool].
CAUTION:
Never reuse gasket.
4. Tighten drain plug to the specified torque. See: Transmission and Drivetrain/Manual Transmission/Transaxle/Service and
Repair/Overhaul/Transmission Assembly/Exploded View.