Nissan and Datsun Workshop Service and Repair Manuals

Body Control Module: Service and Repair
Without Intelligent Key System

Exploded View

BCM (BODY CONTROL MODULE)

Exploded View

CAUTION:
Before replacing BCM, perform "READ CONFIGURATION" to save or print current vehicle specification.  See: Testing and Inspection/Additional
Service When Replacing Control Unit (BCM)/Description/Without Intelligent Key System

Removal and Installation

BCM (BODY CONTROL MODULE)

Removal and Installation

CAUTION:
Before replacing BCM, perform "READ CONFIGURATION" to save or print current vehicle specification.  See: Testing and Inspection/Additional
Service When Replacing Control Unit (BCM)/Description/Without Intelligent Key System

REMOVAL
1. Remove knee protector.  See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Exploded View
2. Remove fuse block (J/B).
3. Remove harness clip.
4. Remove screws.
5. Remove BCM and disconnect the connector.

INSTALLATION
Install in the reverse order of removal.

CAUTION:
-

Be sure to perform "WRITE CONFIGURATION" when replacing BCM.

-

Be sure to perform the system initialization (NATS) when replacing BCM.  See: Testing and Inspection/Additional Service When Replacing
Control Unit (BCM)/Special Repair Requirement/Without Intelligent Key System