Cube L4-1.8L (MR18DE) (2010)
A. On your C-III screen, look at the Part Number column (see Figure 1 example).
^
If this column is blank (no part number listed), this bulletin does not apply.
^
If a part number (P/N) is listed, write it on the Repair Order and then go to Step B.
B. Compare the P/N you wrote down to the P/Ns in the Current TCM P/N column in Table A below.
^
If there is a match, this bulletin applies. Continue with reprogramming and the entire Service Procedure.
NOTE:
If there are two lines (two reprogramming options) on your C-III screen, use the one that does not have the message "Caution! Use ONLY with
NTBXX-XXX".
^
If there is not a match, this bulletin does not apply. Refer to ASIST for further diagnostic and repair information.